Mustek PP3000 Manuel d'instructions télécharger pdf (Page 77)

A - 21

APP. A

STAR …

CODES (HEX/CONTROL) : 1B 7A 00 / <ESC> “z” <0>

FUNCTION : Set 1/12 inch line feed

DETAIL DESCRIPTION : Line feed is set at 1/12 inch after this code is

received, and is effective since first <LF> received after this command.

CODES (HEX/CONTROL) : 1B 7A 01 / <ESC> “z” <1>

FUNCTION : Set 1/6 inch line feed

DETAIL DESCRIPTION : Line feed is set at 1/6 inch after this code is

received, and is effective since first <LF> received after this command.

CODES (HEX/CONTROL) : 1B 7A 30 / <ESC> “z” “0”

FUNCTION : Set 1/12 inch line feed

DETAIL DESCRIPTION : Line feed is set at 1/12 inch after this code is

received, and is effective since first <LF> received after this command.

CODES (HEX/CONTROL) : 1B 7A 31 / <ESC> “z” “1”

FUNCTION : Set 1/6 inch line feed

DETAIL DESCRIPTION : Line feed is set at 1/6 inch after this code is

received, and is effective since first <LF> received after this command.

CODES (HEX/CONTROL) : 1C / <FS>

FUNCTION : Immediate drive command for peripheral unit 1

DETAIL DESCRIPTION : Execute drive pulse for peripheral unit 1

immediately. This code differs from the <BEL> code as follows: When the

printer receives an <FS> code, the command is executed immediately. The

<BEL> code is stored in the data buffer in the same manner as other codes, and

executed in the order in which they are received.

1 2 ... 72 73 74 75 76 77 78

Pas de commentaire

Mustek PP3000 Manuel d'instructions Page 77